PRODUCTS

AutoDoser

AutoSpray -
  (Auto Teat Sprayer)

Carbon Water Filter

Cluster Flush

Coil Udder Washer

Coil Washer (Wall-Mount)

Dip Cups

Dosatron -
  (Proportional Pump)

Heater Elements -
(Stainless Steel)

Float Switch

Heat Recovery

Mastitis Detector

Milk Filter

Mini Plant Washer

Mini Wash
(Chemical Dispenser)

MooJet -  
(AutoTeat Sprayer)

Multi-Adaptor

Polyphospate Salts Dispenser

Pumps

Scale Reducers -
(Electric ESP1 /  ESP2)

Scale Reducers -
(Chemical)

Spray Guns

Sprayers - Hand Held

Stands - (Water Heater)

Supaspray
  (Vacuum Teat Sprayer)

Tank Washer -
  (Floor Standing)

Thermostats

Time Clock -
(48 Hour Timer)

Teat Dip Cups

Udder Washers

Wash Station

Water Filter - In Line

Water Heaters -
  (Floor Standing)

WaterHeater-10G/45L (calf feeding)

Water Heaters -
  (Wall Mounted)

•  unique “semi-immersed” design eliminates problems
  and reduces down-time
• very high performance, very long life
• works with most modern dairy chemicals
• rugged construction resists wear and tear
• no springs to break or diaphragms to perforate or leak
• no priming required, no leakage is possible
• minimal installation - just connect vacuum and spray lines, then drop into the neck of the chemical drum
• few moving parts make servicing quick, simple and inexpensive
• minimal wear -the pump stops when operating pressure is reached.

The SupaSpray teat sprayer is powered by the dairy vacuum supply. Its sophisticated power unit sits directly on top of the chemical drum, and a flexible chemical pickup tube connects to the filter assembly suspended just above the base of the drum.

The sprayer is an extremely efficient user of the the dairy vacuum supply. It will only pump if there is a need to "build up" pressure. Once the correct pressure is attained it will automatically stop pumping, significantly reducing wear.

SupaSpray is capable of spraying most modern dairy chemicals using either a Cotswold spray gun or most other manufacturers’ spray guns. Included in the package are three Cotswold VS26 spray guns. The SupaSpray pump is available alone, for upgrading other manufacturer’s systems.

Very Easy Setup. Only two connections are required - the vacuum supply (connected via a 10mm flexi-tube to the plant vacuum), and an outlet tube to the spray guns (included).

 PACK CONTENTS
(Supa-Comp):

TECHNICAL DATA

Weight 2.2 lbs / 1 kilo (pump only)

Materials A combination of Stainless Steel & engineering plastics

Pressure up to 45psi ( 3 bar )

Dimensions Diameter 4.6” / 116mm, Length 14” / 360mm

The SupaSpray is available as a pump only - for use with other manufacturer's systems, or complete with three Drop Points (opposite) which include Cotswold's VS26 Spray Gun.

NOTE

The Supaspray pump is not designed to work indefinitely with chlorine-based chemicals. Whilst it will work well with these chemicals, the life of the seals and other wearing parts will be shortened and the your warranty will be adversely affected.

Hi-Performance Low Cost
Vacuum-Operated Teat Spray System

• vacuum operated pump,
• 15 metres horizontal chemical tube
• tube connectors,
• 3 complete drop points including
• 3 x VS26 spray guns.