PRODUCTS

AutoDoser

AutoSpray -
  (Auto Teat Sprayer)

Carbon Water Filter

Cluster Flush

Coil Udder Washer

Coil Washer (Wall-Mount)

Dip Cups

Dosatron -
  (Proportional Pump)

Heater Elements -
(Stainless Steel)

Float Switch

Heat Recovery

Mastitis Detector

Milk Filter

Mini Plant Washer

Mini Wash
(Chemical Dispenser)

MooJet -  
(AutoTeat Sprayer)

Multi-Adaptor

Polyphospate Salts Dispenser

Pumps

Scale Reducers -
(Electric ESP1 /  ESP2)

Scale Reducers -
(Chemical)

Spray Guns

Sprayers - Hand Held

Stands - (Water Heater)

Supaspray
  (Vacuum Teat Sprayer)

Tank Washer -
  (Floor Standing)

Thermostats

Time Clock -
(48 Hour Timer)

Teat Dip Cups

Udder Washers

Wash Station

Water Filter - In Line

Water Heaters -
  (Floor Standing)

WaterHeater-10G/45L (calf feeding)

Water Heaters -
  (Wall Mounted)

 

A reliable and versatile udder wash system which automatically entrains chemical.

 

The main stainless steel unit houses a pump, a stainless steel 3Kw heating element, a 3 gallon tank and a sophisticated control system.

 

The unit is supplied complete with 3 Udder-Wash Guns . Additional parts and materials to create the external pipe-work system are available from your Cotswold dealer.

INSTALLATION NOTES

TYPICAL INSTALLATION:- Use 2 short lengths of ½" flexible PVC hose to join the unit to the rigid-PVC parlour pipework. The plastic adaptors supplied are fixed at the parlour pipework end.

 

Parlour pipework varies, but in all cases a "flow and return" system is used.

 

SYSTEM A (separate flow & return). use rigid parlour delivery pipe around the parlour with drop points on each side. This system works well on the wider herringbone parlours and on back-to-back abreast parlours, and is easy to install.

 

Dropper points using tees are inserted in rigid pipework using PVC solvent cement.

 

SYSTEM B (combined flow & return). Use a single rigid delivery pipe down the centre of the herringbone parlour, (or strapped to the milk-line in the case of an abreast parlour), with tees inserted as necessary to provide drop points where required, (the last drop point is a 90 ° elbow).

 

Using the plastic adaptors supplied, cement the flow line (from the circulating pump) to a length of 3/8" flexible PVC tubing and push this through the centre of the rigid pipe until the end of the tubing reaches the last drop point. This results in a neat installation with flow and the return system created using (apparently) only one rigid pipe.

 

Avoid acute changes of direction in the rigid pipe-work to ensure that the flexible pipe is not kinked - in all changes of 90° use 2 x 45° bends joined together to make a gradual turn.

 

(To aid pressure, units should be mounted as high as possible)

The Cotswold UDDER WASHER is an integrated wall-mounted water heater.  

 

The unit supplies continuously re-circulating  warm water AND chemical to the three udder-washer guns.  

 

The unit is fully extendable and can cope with at least 20 spray guns.

• Re-Circulating Udder Washer:
• Premium Udder Wash product.
• Wall mounted stainless steel cabinet.
• Built-in chemical dispenser.
• Suitable for large and small parlours.
• Capacity to wash every cow or selected cows.
• Gravity-fed Pumped system.  Not dependent on water pressure.
• Automatic  chemical entrainment into incoming supply - stored water is sanitized.
• Hot water is continuously circulated round the system.
• Instant hot water at every wash point.
• “Frost mode”- prevents freezing.
• 15 Litre hot water tank with 3 KW heating element.
• Needs only 13 amp electricity supply.
• Will work on sites with poor water supply.
• Thermostatically controlled temperature –
•   Max 40 degrees C.